What Are Glycol Chiller Systems?

Glycol chiller systems are widely used across UK industries where precise temperature control is required. From food and beverage production to pharmaceutical manufacturing and industrial processing, these systems provide consistent cooling performance using a glycol-water mixture as the heat transfer medium.

Unlike standard water chillers, glycol chillers use a mixture of propylene or ethylene glycol combined with water. This makes them suitable for processes requiring sub-zero temperatures and environments subject to low ambient conditions.

At a fundamental level, glycol chiller systems remove heat from a process and transfer it away through a refrigeration circuit. The cooled glycol solution is then circulated to the load, where it collects process heat and returns to repeat the cycle.

How a Glycol Chiller System Works

Effective system design ensures consistent output and reduced energy consumption. Core components typically include:

• Compressor


• Heat rejection condenser


• Evaporator heat exchanger


• Expansion valve


• Integrated buffer tank and circulation pump


• Electrical control system

Within the evaporator, the refrigeration cycle removes heat from the circulating glycol solution. The chilled solution is then sent to the process load, absorbs heat, and flows back to the unit.

A typical glycol chiller system diagram shows the separation between the primary refrigeration loop and the secondary glycol circuit. The refrigeration loop manages heat removal, while the glycol loop delivers cooling to the equipment or product. Accurate schematics are valuable for installation, servicing and fault finding.

The Control Panel: Managing Performance and Safety

The glycol chiller system control panel acts as the central interface for monitoring and adjustment. Modern panels typically include:

• Digital temperature controllers


• PLC or microprocessor interfaces


• High and low pressure safety switches


• Circulation pump management


• Fault indication systems


• BMS or remote access integration

The control panel regulates compressor operation, maintains setpoint temperatures and monitors system pressures. Many systems also log performance data to support preventative maintenance and compliance documentation.

In facilities requiring precise cooling, reliable control prevents temperature drift that could affect product quality or equipment integrity.

Installing a Glycol Chiller System Control Panel

Proper glycol chiller system control panel installation is essential for consistent performance and regulatory compliance. Key factors include:

• Electrical compliance – The panel should be installed in accordance with UK standards, with correct breaker sizing and safe isolation points.


• Environmental positioning – Panels should be located in dry, well-ventilated areas away from excessive heat, vibration or moisture.


• Commissioning procedures – Qualified engineers should verify sensor calibration, test alarms and confirm pressure switch operation.

Commissioning ensures the unit operates in line with the original glycol chiller system design specifications.

Design Considerations for Glycol Chiller Systems

Effective glycol chiller system design begins with accurate assessment of the cooling load. Engineers evaluate:

• Target operating temperatures


• Hydraulic design and circulation requirements


• External temperature influences


• System resilience planning


• Future expansion potential

Oversized systems increase energy consumption, while undersized units struggle to maintain setpoints. Load calculations must consider peak demand and operational cycles.

Fluid selection also plays a role. Propylene glycol is commonly used in food and beverage settings due to its lower toxicity, whereas ethylene glycol may be selected for industrial environments requiring improved heat transfer efficiency.

Additional considerations such as pipe insulation, pump specification and heat exchanger configuration influence stability, efficiency and lifespan.

Where Glycol Cooling Is Used

Glycol chiller systems support numerous sectors across the UK, including:

• Beer and spirit production


• Dairy and food processing facilities


• Pharmaceutical production environments


• Precision equipment temperature control


• Plastics processing and injection moulding


• Cold storage and preparation areas

For example, in beverage production, chillers regulate process temperatures and stabilise product storage. In manufacturing settings, they protect equipment from excessive thermal build-up.

Maintenance and Long-Term Reliability

Routine maintenance supports consistent output and equipment longevity. Typical servicing tasks include:

• Checking glycol concentration levels


• Assessing circulation components


• Removing debris from heat rejection surfaces


• Verifying control panel settings


• Confirming correct refrigeration performance

Over time, glycol can degrade or become contaminated, reducing heat transfer efficiency. Regular testing helps maintain optimal performance.

When correctly designed, installed and maintained, glycol chiller systems can provide reliable service for many years.

Common Queries About Glycol Chiller Systems

What glycol concentration should be used?

The required percentage depends on freeze protection and operating temperature, commonly ranging from 20–40%.

Is external installation possible?

Yes, provided the unit is rated for outdoor use and protected against environmental exposure.

What makes glycol systems different?

Glycol systems use a glycol-water mixture to allow lower operating temperatures and prevent freezing.

Is remote access available?

Many contemporary glycol chiller system control panels integrate with BMS platforms or secure remote systems.

How often should glycol fluid be tested?

Fluid condition should be reviewed regularly based on system workload.

Which industries benefit most from glycol chillers?

Industries requiring stable and low-temperature control frequently depend on glycol-based systems.

Final Considerations

Glycol chiller systems deliver reliable and consistent temperature control across a broad range of industrial and commercial applications. From accurate load calculation and correct commissioning through to routine servicing, every stage affects efficiency and longevity.

Whether planning a new installation or upgrading existing equipment, engaging knowledgeable engineers helps align system capacity with process needs. For technical advice and tailored solutions, visit the relevant specialists at the Newsome glycol chillers page to review professionally engineered systems.